COP-USA DVRHD-8D1 - Manual (Page 42)

36
Digital Video Recorder User Manual
Step 1: enter into system configurationnetwork
configurationemail; refer to Fig 4-31:
SMTP Server/Port: the name and port number of SMTP
server. After selecting “This server requires a secure
connection (SSL)”, user can setup mail servers (such as
Gmail) according to actual needs.
Send address/password: sender’s email
address/password
Receive address: receiver’s email address. Here user can
add at least three mail addresses.
Click TEST button to test the validity of the mailbox.
Attaching image: After selecting it, the system will attach
images when sending the emails.
Fig 4-31 network configuration-email
4.6.4 Server
This function is mainly used for connecting ECMS. The user
needs to enable the active report first in the ECMS when
adding a new device. Then enter into the server interface
and enable it. Input the IP address and port of the transfer
media server of ECMS. The default server port is 2009. If it is
modified, please enter into the transfer media interface to
check. After the user enables the active report, the ECMS
system will auto allot a Device ID. The user needs to check
this reported device ID in the ECMS.
Fig 4-32 network configuration-server