Elektron Analog Four - Manual (Page 23)

PROJECTS
15
• The currently active project is linked to the slot indicated by a small arrow in front of the project
name.
• Projects can be copied/cleared/pasted in the LOAD PROJECT and SAVE PROJECT menus.
• A lock symbol indicates the project is write protected.
PROJECT MANAGER launches the PROJECT MANAGER menu. Selecting a project in this menu and press-
ing the [RIGHT] arrow key will bring up a list of commands.
CLEAR resets the project slot to a clean state.
INIT NEW initializes an empty file slot with a clean project. This operation is only available for
empty project slots.
DELETE removes the project from the slot.
RENAME opens a screen where you can rename the project file.
LOAD FROM loads the selected project. This will overwrite the active project!
SAVE TO saves the active project to the selected slot.
TOGGLE toggles write protection on or off. Write protected projects can not be overwritten,
renamed or erased. A write protected project is indicated by a lock symbol.
• Multiple projects can be selected and deselected by highlighting them and pressing [YES/SAVE].
• The currently active project is linked to the slot indicated by a small arrow in front of the project
name.
• Projects can be copied/cleared/pasted in this menu.
• LOAD FROM in the PROJECT MANAGER will overwrite the active project. Be sure to save your
project before you load another.