Elektron Analog Four - Manual (Page 26)

KITS AND SOUNDS
18
PERFORMANCE MODE
The PERFORMANCE mode makes it possible to control five track parameters, that can be chosen from any
track, at the same time by turning a single DATA ENTRY knob. This is called a performance macro. Track mut-
ing and an overview of all synth and FX track levels are available in this mode as well. PERFORMANCE mode
settings are saved as a part of a kit.
Access the PERFORMANCE mode by pressing the [PERFORMANCE] key.
The ten available performance macros are seen in the PERFORMANCE menu. Turn the DATA ENTRY knobs to
adjust the parameter macro settings. The graphics indicating the active kit will briefly change to reflect the mute
status of the tracks.
PERFORMANCE SETUP
The ten performance macros available in the PERFORMANCE mode are set up in the PERFORMANCE
SETUP menu. Access this menu by pressing [FUNCTION] + [PERFORMANCE].
• The collection of all ten performance macros can be copied, cleared and pasted while in this
menu.
PERFORMANCE CONFIGURE is where parameters are assigned to the performance mac-
ros. After selecting this option, the list of performance macros and the knobs they are
assigned to will show up. In this menu, individual performance macros can be copied, cleared
and pasted.
Use the [UP] and [DOWN] arrow keys to select the DATA ENTRY knob corresponding to the
performance macro that will be edited. Press [YES/SAVE] to confirm the selection. You can
also click on a knob to bring up its macro menu. The menu where track parameters are
assigned to the selected performance macro will appear.