Midi port config – Elektron Analog Four User Manual
Page 57
GLOBAL MENU
49
MIDI PORT CONFIG
MIDI port related settings are found in this menu. Change settings by using the [LEFT]/[RIGHT] arrow keys.
TURBO SPEED selects the multiplier of the MIDI transfer rate that will be used when Analog
Keys MIDI IN/OUT ports are connected to the MIDI OUT/IN ports of a turbo protocol compati-
ble device. The [LEFT]/[RIGHT] arrow keys are used to select the multiplier. If AUTO is cho-
sen, press [YES/SAVE] to start the turbo speed negotiation.
OUT PORT FUNCTIONALITY selects what type of signal the MIDI OUT port will send.
• MIDI makes it possible for the port to send out MIDI data.
• DIN 24 will make the port send DIN 24 sync messages. No MIDI data can be sent
when this option is selected.
• DIN 48 will make the port send DIN 48 sync messages. No MIDI data can be sent
when this option is selected.
•
On DIN 24/48 operation: When the [STOP] key is pressed twice quickly, the DIN sync outputs are
put in a ready to start mode. In this mode, the synced unit will start directly when the sequencer
starts. When in this mode, an external unit (for example a TB-303) cannot be programmed. Exit the
ready to start mode by pressing [STOP] once.
THRU PORT FUNCTIONALITY selects what type of signal the MIDI THRU port will send. The
same settings as for OUT PORT FUNCTIONALITY exist.
INPUT FROM selects the source Analog Keys will receive MIDI data from.
• DISABLED will make Analog Keys disregard any incoming MIDI data.
• MIDI will make Analog Keys listen only to MIDI data sent to the MIDI IN port.
• USB will make Analog Keys listen only to MIDI data sent to the USB port.
• MIDI+USB will make Analog Keys listen to MIDI data sent to both the MIDI IN and
USB ports.
OUTPUT TO selects the destination to which Analog Keys will send MIDI data.
• DISABLED will stop Analog Keys from sending out any MIDI data.
• MIDI will make Analog Keys send MIDI data to the MIDI OUT port only.
• USB will make Analog Keys send MIDI data to the USB port only.
• MIDI+USB will make Analog Keys send MIDI data to both the MIDI OUT and USB
ports.