Elektron Analog Four - Manual (Page 98)

C-2 Appendix C: CV TRACK PARAMETERS
CV (PITCH HZ/V)
TUN (Coarse Tune) sets the coarse tuning of the CV in semi-
tones.
FIN (Fine Tune) sets the fine tuning of the CV.
BND (Bend Depth) controls the bend depth. The higher the set-
ting, the more the pitch of a trigged note will be offset.
SLI (Note Slide time) sets the CV control of the slide time of note
slides.
SRC (Source Track) selects the track whose notes should be
used for sending CV signals. The CV track, FX track and synth
tracks 1-4 can be used as source.
.
CV (VALUE LIN)
VAL (Value) sets the voltage level of the CV. Applicable when the
chosen CV type is VALUE LIN.