Elektron Analog Four - Manual (Page 56)

GLOBAL MENU
48
SEQUENCER CONFIG
Here settings relating to the sequencer can be found. Change settings by using the [LEFT]/[RIGHT] arrow keys.
QUANTIZE LIVE REC will when active quantize notes entered in LIVE RECORDING mode to complete
sequencer steps. When the setting is deactivated, live recorded notes will where applicable be affected by micro
timing. Read more about micro timing in the section “NOTE MENU” on page 35.
KIT RELOAD ON CHG will cause kits to reload to their saved state automatically as soon as a new kit becomes
active. This is useful if you for example play live and have tweaked a kit, want to save it and then return to a pat-
tern featuring the same kit, but with its original settings.
MIDI CONFIG
In this menu various sub-menus dealing with the MIDI functionality of Analog Keys are found.
MIDI SYNC
Controls how Analog Keys receives and sends MIDI clock and transport commands. Change settings by using
the [LEFT]/[RIGHT] arrow keys.
CLOCK RECEIVE will when active make Analog Keys respond to MIDI clock sent from exter-
nal devices.
CLOCK SEND will when active make Analog Keys transmit MIDI clock.
TRANSPORT RECEIVE will when active make Analog Keys respond to system realtime mes-
sages like play, stop, continue and song position pointer.
TRANSPORT SEND will when active make Analog Keys send out system realtime messages
like play, stop, continue and song position pointer.
PRG CH RECEIVE will when active make Analog Keys respond to incoming program change
messages, which is useful when wanting to select patterns externally. The MIDI channel that
will listen to incoming program change messages is set in the MIDI CHANNELS menu, cov-
ered on page 50.
PRG CH SEND will when active send program change messages when patterns are changed.
The MIDI channel that will send program change messages is set in the MIDI CHANNELS
menu, covered on page 50.