Elektron Analog Four - Manual (Page 25)

KITS AND SOUNDS
17
KIT MENU
In the KIT menu commands relating to kits are found, most importantly kit save and load. Open the menu by
pressing [KIT]. Use the [UP] and [DOWN] arrow keys to move between the commands. Press [YES/SAVE] to
confirm your selection. Exit the menu by pressing [NO/RELOAD].
RELOAD KIT will reload either the active kit, reverting it to its saved status, or all kits. Using the [LEFT] and
[RIGHT] keys selects whether only the active kit or all kits will be reloaded. [NO/RELOAD] + [KIT] offers a short
cut to reloading the active kit.
LOAD KIT opens a menu where one of the up to 128 saved kits can be loaded. When this menu is opened the
kit list will appear. The active kit is indicated by inverted graphics. Select the kit to be loaded by using the
[ARROW] keys or the SOUND SELECTION wheel. [LEFT]/[RIGHT] will quickly scroll between the menu
pages. Once a kit has been selected, press [YES/SAVE] to load it. The loaded kit will be linked to the active pat-
tern. Loading the active kit will reload it.
SAVE KIT is where all the current, kit related, settings can be saved as a kit. The saved kit will be linked to the
active pattern. [YES/SAVE] + [KIT] offers a short cut to this command.
When this menu is opened the kit list will appear. The active kit is indicated by inverted graphics. Select the slot
to which the kit will be saved by using the [ARROW] keys or the SOUND SELECTION wheel. Press [YES/
SAVE] to save to the selected slot. The NAMING menu, covered on page 10, will appear.
CLEAR KIT will clear the content of the currently loaded kit, basically initializing it. When selecting this option a
prompt will appear. Press [YES/SAVE] to clear the kit or [NO/RELOAD] to cancel the operation. Note that no kit
information will be permanently lost until the kit is saved to the same kit slot it was loaded from.
PERFORMANCE opens the PERFORMANCE SETUP menu, covered on page 18.
POLY CONFIG opens the POLYPHONY CONFIGURATION menu. See page 20.
VOICE ROUTING accesses VOICE ROUTING. See page 21.
• Copy, clear and paste operations are available in the LOAD KIT, SAVE KIT and PERFORMANCE
SETUP menus.
• Use the SOUND SELECTION wheel to scroll through the LOAD KIT and SAVE KIT menus.
• Once you have assembled a kit you like, you are advised to save it.
• Kits not used by any patterns are indicated by an asterisk after the kit name.