Elektron Analog Four - Manual (Page 80)

SETUP EXAMPLES
72
6. Select track 1. Set WAV on the OSC1 page to IN L. For oscillator 2, choose one of the internal Analog Keys
waveforms.
7. Note trigs placed on track 1 will now control both the internal and the external oscillators.
• Use parameter locks to alternate the waveform of oscillator 1 between external/internal selections.
• This example can use more than one external oscillator. If two separate external oscillators are
connected to Analog Keys external inputs, both oscillators can be used on for example track 1.
Track 2-4 could then use only internal oscillators.