Hardy Floor Scales User Manual
Page 32
Hardy Floor Scales
23
Step 4.
Loosen the cable gland nut for the load
sensor cable you want to remove. (See Fig.
19)
FIG. 19 CABLE GLAND
Step 5.
From the load sensor pull the cable out of
the junction box and through the channel
until all the cable has been removed.
Step 6.
Use the closed eye bolts and chain, cable
or nylon strapping to lift the floor scale
high enough to remove the load sensor or
turn the scale completely over and let the
top plate rest on blocks for easier access to
the feet.
Step 7.
Block the floor scale adequately so that the
platform will not drop on any machinery
or personnel.
Step 8.
Remove the lock bolt on the load sensor
foot you are removing. Store in a safe
place so that you don’t forget to install it.
Step 9.
Pull the load sensor leveling foot out of the
load sensor.
Step 10.
Use a socket wrench and remove the two
bolts that fasten the load sensor to the
mount.
Step 11.
Lift the load sensor out of the housing.