Hardy Floor Scales User Manual
Page 42
Advertising
Hardy Floor Scales
33
FIG. 27 FOOT RETAINER PLATES
INSTALLATION
NOTE:
The platform has been removed for clarity purposes.
Foot Retainer
Plates Installation
Step 1.
Place the Floor Scale in position.
Step 2.
Place the foot retainer plate under the foot,
plate edge should extend out from under
the scale.
Step 3.
Drill two (2) holes using a hammer drill.
(See Specifications/Anchor Bolt Holds
above for hole dimensions) Insert anchor
bolts with the nut and washer already
attached.
Step 4.
Tap the anchor bolts into the hole then
tighten the nuts securely.
Step 5.
Repeat this process for each plate used in
your installation.
Advertising