Hardy WS100 Configuration Software - Manual (Page 12)

Chapter 3 - Installation
3-1
CHAPTER 3 - INSTALLATION
Installing the Hardy
Instruments
Configuration
Software Contact your local Hardy Representative or Hardy
Instruments Sales Department for information about
how to purchase the Hardy WS 100 Configuration
Software for Windows.
Step 1. The SETUP program copies the required
files to your hard disk.
Step 2. Run Windows NT/95/98/2000 and insert
the Configuration Installation System Disk
into the 3.5” floppy drive.
Step 3. Click on START.
Step 4. Click on Run.
Step 5. In the Run field type the command:
a:setup. If your floppy drive is drive b
enter: b:setup.
Step 6. Press the Enter key.
Step 7. You can also use the Add/Remove Func-
tion in the Control Panel dialogue box.
1 Click on Start
1 Move the cursor to Settings.
1 Select Control Panel.
1 Double click on the Add/Remove Programs
icon.
1 Click on the Install button.
Step 8. The SETUP program will lead you
through the installation process.
Installation of
RSLOGIX Please refer to your Allen Bradley Installation and
Operation manual for instructions.
Installation of RSLINX
or RSLINX Lite Please refer to your Allen Bradley Installation and
Operation manual for instructions.