Fig. 4-2 comm setup -4 – Hardy WS100 Configuration Software User Manual
Page 19
Advertising
HI WS100 CONFIGURATION SOFTWARE
4-4
FIG. 4-2 COMM SETUP
Step 2.
Enter the SLC slot number of the installed
HI 1746-WS Weigh Module in the Slot
textfield.
Step 3.
Enter the Station number of your SLC in
the Station textfield. This number must be
an Octal number for the Station number.
Step 4.
Select a driver (supplied by RSLinx) by
clicking on the down arrow on the
“Driver” pull down menu. Click on the
driver you want to use to communicate
with the HI 1746-WS.
CAUTION:
DO NOT CLICK IN THE CHECK BOX NEXT TO
THE “USE DTSA.TXT FILE”.
Step 5.
If the HI 1746-WS module is installed in a
remote rack, click in the check box next to
the word “Remote?”. (See Fig. 4-3)
Advertising