Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 23)

EN-21 5000 Series Indicators
•
•
•
3.4.5 Power On Unit
Set the unit of measures displayed at startup
AUtO = last unit in use when turned off
PWr.UN kg = kilograms
PWr.UN g
= grams
PWr.UN lb = pounds
PWr.UN oz
= ounces
PWr.UN lb:oz = pound ounces
PWr.UN t = tonnes
PWr.UN C
= custom unit
NOTE: Units oz, lb:oz and C (custom) will not be valid as Power On units when Range is set to Dual. The
next available unit will be displayed instead
3.4.6 Zero Range
Set the percentage of scale capacity that may be zeroed.
2% = zero up to 2 percent of capacity
100% = zero up to full capacity
3.4.4 Graduation
Set the scale readability.
0.00001, 0.00002, 0.00005, 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02,
0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000.
NOTE: Graduation settings are limited to values from Capacity divided by 1000 to Capacity divided by
30000. Therefore, not all settings are available for each capacity.
NOTE: If dUAL was selected in the rANGE menu item, the Graduation setting defines the Range 1 graduation.
The Range 2 graduation is automatically defined as one step greater than the Graduation setting. For
example, if Graduation is set to 0.001, the Range 2 graduation becomes 0.002.
NOTE: Range 2 graduation is retained even under half capacity until the scale returns to zero.