Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 61)

EN-59 5000 Series Indicators
Weighing Instruments verified at the place of manufacture bear one of the preceding marks on the pack-
ing label and the green ‘M’ (metrology) sticker on the descriptive plate. They may be put into service
immediately.
Weighing Instruments to be verified in two stages have no green ‘M’ (metrology) on the descriptive plate
and bear one of the preceding identification mark on the packing label. The second stage of the initial
verification must be carried out by the approved service organization of the authorized representative
within the EC or by the national weights & measures (W+M) authorities.
Important Notice for verified weighing instruments
The first stage of the initial verification has been carried out at the manufacturer’s work. It comprises all tests according to the
adopted European standard EN 45501:1992, paragraph 8.2.2.
If national regulations limit the validity period of the verification, the user of the weighing instrument must strictly observe the
re-verification period and inform the respective W+M authorities.
Disposal
In conformance with the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE) this device may not be disposed of in domestic waste. This also applies to countries outside
the EU, per their specific requirements.
Please dispose of this product in accordance with local regulations at the collecting point specified for
electrical and electronic equipment.
If you have any questions, please contact the responsible authority or the distributor from which you
purchased this device.
Should this device be passed on to other parties (for private or professional use), the content of this
regulation must also be related.
Thank you for your contribution to environmental protection.