Industrial Data Systems IDS 440 User Manual
Page 34
IDS440 Users Manual version 4.2
Set Operation Parameters
30
Parameter 24 Serial Port 1 Baud Rate (1 [9600 baud])
Enter a baud number from the table below to select a baud rate from the description
column. (*HS baud rates for the 100 samples per sec version only).
Baud Number
Baud Description
1
9600 Baud
2
4800 Baud
3
2400 Baud
4
1200 Baud
5
600 Baud
6
300 Baud (* HS 19.2K)
7
150 Baud (*HS 38.4K)
Parameter 25 Serial Port 2 Mode (4 [8 data bits, no parity])
Enter the mode number from the table below to select the mode parameter in the mode
description column.
Mode Number
Mode Description
1
7 data bits, no parity
2
7 data bits, even parity
3
7 data bits, odd parity
4
8 data bits, no parity
5
8 data bits, even parity
6
8 data bits, odd parity
Parameter 26 Serial Port 2 Baud Rate (1 [9600 baud])
Enter a baud number from the table below to select a baud rate from the description
column. (*HS baud rates for the 100 samples per sec version only).
Baud Number
Baud Description
1
9600 Baud
2
4800 Baud
3
2400 Baud
4
1200 Baud
5
600 Baud
6
300 Baud (* HS 19.2K)
7
150 Baud (*HS 38.4K)
Parameter 27 TX2 Control / Station ID (255 [single station])
Serial Port 2 can be used for continuous transmission of scale data or as a network buss
or for single station remote control.
•
Enter a 0 to enable continuous transmission of TX 2 data. The data sent is configured
in parameter 28 (TX2 Format).