JMC Installing Online Software - Manual (Page 45)

JMC Online Software Page 45 of 81 Last update on 7/17/08
Special Instructions for District-Level Online Setups
If you are using a JMC District Application and you have more than one building to set
up online, make folders for each building in the JMC folder on your web server and then
put a copy of the district application DLL into each of the folders.
For example, if you wish to have online access for a junior high and senior high, create
two folders in the cgi-bin folder called JH and SH. Copy the JMC_CGI_XXYY.dll
(where XXYY is the school year, e.g. 0607) into both folders.
Then, use the JMC District Application to attach each of these CGIs to the correct JMC
“database”. First, log into the District Application for the senior high, then select File –
Select Online Software… and navigate to the copy of the JMC_CGI_XXYY.dll (where
XXYY is the school year, e.g. 0607) in the SH folder and select it. Do the same types of
steps for the junior high by logging into the JMC District Application for the junior high
and then selecting File – Select Online Software… to navigate to the copy of the
JMC_CGI_XXYY.dll (where XXYY is the school year, e.g. 0607) in the JH folder.
Your users will then need to log in to the JMC Online software using slightly longer
URLs. For example, the URL for the high school might look something like
http://192.168.1.1/cgi-bin/HS/JMC_CGI_XXYY.dll (where XXYY is the school year,
e.g. 0607).
Note the
additional HS
level in the
pathname.