A&D Weighing AD-4407 User Manual
Page 10
Page
8
AD-4407 Weighing Indicator
4.
4.
4.
4. Description of Panels and symbols
Description of Panels and symbols
Description of Panels and symbols
Description of Panels and symbols
4.1.1.
Front Panel Description
No. Name
Description
1 STABLE
Indicates when the display is stable.
2 NET
Indicates when the weight is net weight.
3 ZERO
Indicates when the display weight is in the Zero range.
PT
Indicates when the PRESET TARE value is being used.
READY
Indicates the state of comparison or batching.
M+ (Accumulation)
Indicates when there is a result of addition or accumulation.
4
Triangle 1,2,3
Depending on the function selected, indicates various states.
5 Main display
Displays the weight data, stored parameters and accumulated result.
6 UNIT part
Unit used to weigh.
7 HI/OK/LO
Indicates the results of comparison.
8 Capacity label
Capacity and division are described
9 CODE key
The key to select the code memory.
SAMPLE key
The key to store the unit weight for counting function.
SETPOINT key
The key to store the comparator value.
PT key
The key to store the PRESET TARE value.
TOTAL key
The key to display the total weight.
M+ key
The key to display the total weight.
START key
The key to start comparison / batch weighing.
STOP key
The key to stop comparison / batch weighing.
MODE key
The key to switch the unit used to weigh.
0 – 9 key
The numerical keys.
A – F key
The key to enter a value (press NET/GROSS key at a time).
ZERO key
The key to zero the current display.
CLEAR key
The key to clear the data.
TARE key
The key to perform tare.
'
'
'
'
'
'
'
'
'
TOTAL
4. Description of panels and symbols