ALTANA BYK-mac COLOR Manual - Manual (Page 11)

10
2. System description and Delivery notes
BYK-mac COLOR measures color traditionally at
five aspecular angles (15°/25°/45°/75°/110°) with a
45° illumination. Additional color measurement
”behind” the gloss for color travel of interference
pigments is implemented at -15°. Besides color, the
BYK-mac uses additional illuminations to simulate
sparkle under 15° /45° and 75°. Diffused illumination
for graininess evaluation is created by using a
BaSO4 coated sphere. Detection is performed by a
high resolution camera situated perpendicular to the
surface.
The instrument is operated by the operate button
and the mode -scroll wheel. Both, the operate
button and the scroll - wheel are used to switch on
the instrument. Functions described in this manual
in regards to effect measurement are only available
with BYK-mac.
The instrument complies with the following
standards: DIN 5033, 5036, 6174, 6175-2; ISO
7724; ASTM D2244, E308, E2194, E 1164,
SAE J1545.
BYK - mac* 23mm Ø aperture CM-6362
BYK - mac* 12mm Ø aperture CM-6397
BYK - mac Sensor 23mm Ø aperture CM-6363
BYK - mac Sensor 12mm Ø aperture CM-6398
Comes complete with:
Multi-angle spectrophotometer, black calibration
standard, white calibration standard with certificate,
cyan and effect checking reference, protective cap,
cleaning set for bottom plate, two light protection
covers, seal replacement kit, *BYKWARE smart-
chart software, docking station with USB cable for
memory transfer, instrument interface cable for
online data transfer, 2 rechargeable Li-ion battery
packs, battery holder, 4 AA batteries, short
instructions, operating manual on CD, carrying
case, training.
System description and Delivery notes