ALTANA BYK-mac COLOR Manual - Manual (Page 50)

49
12. Interface
Transfer of data stored in the memory of the
instrument takes place through the docking station.
It contains the USB interface connecting the
instrument with a PC.
To transfer data, the connection cable must be
connected to a USB port on the computer. For the
position and assignment of the socket, please refer
to your computer manual.
The connection point for the USB cable is located at
the back of the docking station. Plug in the cable
included with delivery.
To transfer data, the instrument must be inserted
into the docking station.
To transfer data online from the instrument to the
PC, the instrument interface cable can be used. It
must be pluged directly into the cable connector on
the instrument.
Interface