ALTANA BYK-mac COLOR Manual - Manual (Page 14)

13
Power supply
Rechargeable battery pack
To operate the instrument with the rechargeable
battery pack, make sure it is inserted until it locks
in place.
When inserting the rechargeable battery pack,
ensure that its contacts are aligned with those of
the instrument. See adjacent figure.
The capacity of the rechargeable battery pack
included with delivery is sufficient for about 1000
measurements. When the voltage of the
rechargeable battery pack falls below the required
operating voltage the following message appears on
the display:
“Battery Low !”
Set the battery compartment cover in the slot
again. Lock the cover by sliding it downwards until it
snaps.
Note: To ensure uniform utilization, the rechargeble
battery packs should be exchanged regularly
between instrument and docking station (weekly
recommended).
Docking station power supply
Power is supplied to the docking station through the
external power supply unit. Connect the external
power supply unit to the docking station. Connect
the appropriate end of the power connection line to
the power supply unit and the plug end of the power
connection line to the power outlet. Please verify
that the specifications of the power supply unit
match the power source in terms of current and
voltage.