ALTANA BYK-mac COLOR Manual - Manual (Page 48)

47
11.2.8.1 Interrupt statistic
If interrupt statistic is activated you can interrupt a
checkzone (sample) before reaching the preset
number of measurements.
11.2.8.2,3 Input Parameter 3 and Comment
When active, these parameters allow to assign
individual names for identification of a new test
series.
11.2.8.4 Input ID
When this function is active, you can enter an
identification code e.g. vehicle ID number for each
new test series.
11.2.8.5 Input Checkzone
When active, you can enter a name for each sample
during a test series. When deactivated, the
instrument automatically assigns sample names
incrementally, beginning with SAMPLE 01.
Setup