2 switching on the meter, Switching on the meter, Ee section 4.2) – ALTANA LC 4 User Manual
Page 16
Advertising
Operation
BYK LC 4
16
4.2
Switching on the meter
Note
The meter has an energy saving feature to avoid unnecessary battery deple-
tion. The energy saving feature switches the meter off if no entry is made
during the specified switch off-interval (see section 4.11).
1
Switch on the meter with <
(>.
After a short display test, a measured value is displayed.
If no sensor module is connected, the Err4 error message appears
on the display (see chapter 6 W
Advertising