ALTANA LC 4 - Manual (Page 33)

BYK LC 4 Operation
33
If all storage locations are occupied, the
StoFull message appears. You have
the following options:
4.9.2 Displaying measured data from the memory
Stored measurement datasets always have the main measured value in the
upper display line and a variable display of further elements of the measure-
ment dataset in the lower line.
Display stored datasets as follows:
Save the current measured value.
The oldest measured value (storage location 1)
will be overwritten by this Press < g>
Return to the measuring mode without saving Press < E>
Erase the entire memory See section 4.9.3
1 Display the memory with < M_>.
The W status indicator appears on the display.
The measurement dataset that was saved last is displayed.
2 Scroll through the stored datasets with < <> and <>>.
3 If necessary, display further elements of the dataset (ID number,
date, time, temperature) with <
ß_> [element of the measurement
dataset].
When scrolling further, this element is displayed in the second line
together with the measured value.
4 Scroll through the stored datasets with < <> <>>.
5 2
C
MEM
CAL
TDS
CellTC
S
SAL O
2
TC
RESET
Cell
LAP
m
mbar
mg/l
CAL
STO
LoBat Day.Month h:min min:s Ident Lap
CLR
Lin
Tref20 Tref20
M cm
k cm
Sal
1 cm
K
Tref25
nLF
S/cm
ESC
1 3 1 4
1 n
RCL