ALTANA LC 4 - Manual (Page 40)

Operation BYK LC 4
40
Note
If the timer has been stopped you can
! Reset the timer to the adjusted timer interval with <R>.
! Terminate the timer and switch to the measured value display with
< E>.
4.11 Switch-off interval
The automatic switch-off function switches off the meter automatically if no
entry is made for a specified time (switch-off interval). This saves the battery
of the meter.
You can specify the switch-off interval yourself. The switch-off interval is from
10 minutes minimum to 24 hours maximum.
7 If necessary, stop the timer before the time has expired with < g>
and make it continue with < g>.
8 As soon as the time has expired the alarm signal sounds.
Switch off the alarm signal with <
(>. The timer goes on counting
with a negative sign.
9 Stop the timer with < g>.
1 Switch on the meter with < (>.
The display test is displayed.
2 During the display test (approx. 2 sec.):
Display the switch-off interval with <
M>.
3 Select a switch-off interval with < >> and <<>.
4 Confirm the setting with < g>.
The display switches to the measured value display.
The automatic switch-off function switches off the meter if no entry is
made during the switch-off interval.
min:s
CLR
d
Day.Month
MEM
CAL
C
pH
LoBat Ident Lap
mV
RESET
LAP
ESC
O f F
0 0 0 4
t
h:min