ALTANA Auto-Chart - Manual (Page 28)

3. Filter name: Structure_DarkMetallic_Vertical
Color: Select all dark metallic colors
Check zones: Select the individual vertical
check zones
4. Filter name: Structure_LiteMetallic_Vertical
Color: Select all dark metallic colors
Check zones: Select the individual vertical
check zones
3.筛选名称：结构_颜色深金属色_位置垂直
颜色：选择全部深金属色
检查区域：选择特定的水平检查区域
3.筛选名称：结构_颜色浅金属色_位置垂直
颜色：选择全部浅金属色
检查区域：选择特定的水平检查区域
Note:
In this report you also have a "Grouping" function. The first time the "Grouping" should be set to
"none". Thus, every data point will be the average of the horizontal or vertical zones of one vehicle
- good measure for process stability.
注意：
在这个报告中您还有一个“分组”功能，第一次使用时“分组”被设置为“无”。因此，每一辆车
每一个数据点会被水平或垂直取平均值——过程稳定性测量结果
For further analysis, the grouping can be done by e.g.:
- Model: Shows influence of design
- Color: Shows influence of the paint material
- Paint line: Influence of process
- Checkzone etc.
通过分组进行更多的分析，例如：
- 车型：显示设计的影响
- 颜色：显示油漆材料的影响
- 涂装线：过程的影响
- 检查区域 等等.
The structure chart can be displayed with the results of 2 or 4 filters on one page, an icon for the
desired report can be selected accordingly. In addition, a table is included with the numerical data
of the selected scales.
This report will also graph the entire "Structure Spectrum" for detailed material and process
analysis:
结构图表能够在一页上显示 2 个或 4 个筛选结果，选择相应图标获得所需的报告。此外，表格中还
包含所选标尺的数字数据。
这份报告也绘制了结构谱线的详细内容和过程分析：