ALTANA Auto-Chart - Manual (Page 7)

1.3 Organizer File: Definition of Control Sequence
编排档案：定义管理顺序
This part defines the test sequence to guide the user on the instrument display.
这部分定义测量顺序，在仪器显示屏上指导使用者。
Several test zones can be combined to a "Block". After transfer to the PC, the software will
calculate the average of these zones.
几个测量区域能结合为一个“块”，当数据传输到电脑后，软件能计算出这些区域的平均值。
水平区域
左侧垂直区域
右侧垂直区域
Select the "Control Sequence" folder (1): 选择"Control Sequence" 文件夹 (1):
Checkzone Comment: Enter names of the checkzones in the order to be measured (2).
检查区域注释：根据测量的顺序输入检查区域名称 (2).
Block Comment: Enter names for the combined areas, e.g. for all horizontal zones (3).
块注释：输入结合区域的名称，例如：所有的水平测量区域 (3).
Block No.: Enter the Block comment number to all corresponding zones (4).
块编号：对于所有相同的区域输入这个块的注释编号 (4).
Cut, copy or insert rows: 剪切，拷贝或插入行：
Move the cursor to the left side of the desired row until it changes to a black
arrow (6).
将光标移到列表左边需要的行等到光标变成黑色的箭头 (6).
Click right mouse button to open a menu which will allow to insert, copy and
paste rows or entries.
点击鼠标右键，打开一个菜单允许插入，拷贝或粘帖行或条目。