Buffalo Filter VisiClear - Manual (Page 16)

16 Buffalo Filter® VisiClear™ Operator’s Manual
If the obstruction is not removed or you wish to disable this feature, you may disable the alarm
by pressing the following button on the alarm screen until the red X appears on the occlusion
symbol as shown. See Figure 14.
Figure 14.
Once the alarm is disabled, please press the green checkmark to remove the warning screen and
resume normal operation.
LAPAROSCOPIC MODE:
The occlusion alarm is not functional in the Laparoscopic mode on the VisiClear™ system and
will default off in this mode.
In any of the system’s modes, if you choose to deactivate the occlusion alarm, you may do so on
the home screen by pressing the alarm icon located on the top left of the screen until a red X
appears on the occlusion symbol as shown. See Figure 15.
Figure 15.
ADDITIONAL WARNING SCREENS
If the VisiClear™ motor nears the end of its life or if a problem arises with the motor, the
following warning screen will appear. See Figure 16.
Figure 16