Ahaching the la maker to a wahr supply (cont.), Connecting to water line, Controls water supply – Whirlpool ED20TWXDN02 User Manual

Page 10: Ahaching, Wahr, Maker, Supply, Cont

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INSTALLING YOUR REFRIGERATOR

AHACHING

the

la

maker

to

a

WAHR

supply

(

cont

.)

Connecting to water line

1. Find a y

2

-inch to 1 Vi-inch vertical COLD water

pipe near the refrigerator.

NOTE: Horizontal pipe will work, but the follow­
ing precaution must be taken: Drill on the top
side of the pipe, not the bottom. This will help
keep water away from the drill. This also keeps
normal sediment from collecting in the valve.

2.

Measure from connection on rear of refrigerator

to water pipe. Add 7 feet (2.1 m) to allow for
moving refrigerator for cleaning. This is the

length of Vi-inch O.D. copper tubing you will
need for the job (length from connection to

water pipe PLUS 7 feet [2.1 m]). Be sure both
ends of copper tubing are cut square.

3.

Turn OFF main water supply. Turn ON nearest

faucet long enough to clear line of water.

4.

Using a grounded drill, drill a Vi-inch hole on the

cold water pipe you have selected.

5.

Fasten shut-off valve to cold water pipe with pipe

clamp. Be sure outlet end is solidly In the Vi-inch
drilled hole in the water pipe and that washer is
under the pipe clamp. Tighten packing nut.
Tighten the pipe clamp screws carefully and
evenly so washer makes a watertight seal. Do not
overtighten or you may crush the copper tubing,
especially If soft (coiled) copper tubing is used.
Now you are ready to connect the copper tubing.

6. Slip compression sleeve and compression nut on

copper tubing as shown in diagram. Insert end of
tubing into outlet end squarely as far as it will go.
Screw compression nut onto outlet end with
adjustable wrench. Do not overtighten. Turn ON
main water supply and flush out tubing until water
is clear. Turn OFF shut-off valve on the water
pipe. Coil copper tubing.

Vertical

cold

water pipe

Packing
nut

Water
shut-off
valve*

Compres-

Compression

Sion sleeve nut

V4-inch O.D.

copper tubing
(length from

inlet on rear

of refrigerator

to water pipe

plus 7 feet

[2.1 m])

TO REFRIGERATOR ^

* Controls water supply

10

1-800-253-1301

WITH QUESTIONS OR COMMENTS

Advertising