Removing the meat drawer and cover, To remove the meat drawer, To remove the cover – Whirlpool ED20TWXDN02 User Manual
Page 15: Adiusting, Emoving, Meat, Drawer, Cover, Temperature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
R
emoving
the
meat
drawer
and
cover
To remove the meat drawer:
• Slide the meat drawer straight out to the stop.
• Lift the front slightly and slide it out the rest of
the way.
• Replace in the reverse order.
To remove the cover:
• Remove the meat drawer and the crisper.
• Lift the front of the cover off of the supports and
remove it by puliing up and out.
To replace the cover:
• Fit the back of the cover into the notch
supports on the waiis of the refrigerator and
lower it into piace.
• Repiace the meat drawer and crisper.
ADIUSTING
the
meat
drawer
temperature
(ON SOME MODEIS)
The meat drawer is cooled from cold air that flows
in from the freezer
compartment through
a vent in the wall of
the refrigerator (See
“Ensuring Proper Air
Circuiation” vent C on
page 13.) This helps to
keep the meat drawer
colder than the rest of
the refrigerator for
better storage of meats.
To adjust the temperature, slide the control from
side to side to let more or less cold air into the meat
drawer. Set the control toward Cold for a slightly
cooler temperature, or toward Colder for a much
cooler temperature.
NOTE: Putting the control on the coldest setting
may cause freezing or ice crystals, depending on
the items you have in the meat drawer.
15