Ensuring proper air orcuiation, Removing the snap-on door trivet (on some modeis) – Whirlpool ED20TWXDN02 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING YOUR REFRIGERATOR

E

nsuring

proper

air

orcuiation

In order to ensure proper temperatures, you need

to permit air flow between the two sections. As

shown in the illustration, cold air enters the bottom
of the freezer section (A) and moves up. It then
enters the fresh food section through the top vent
(B). Air returns to the freezer through the vent at (D).

Do not block any of these vents with food such
as soda, cereal, bread, etc. If the vents are
blocked, air flow will be prevented and the tem­
perature controls will not function properly.

To adjust the air control vent C, see “Adjusting the

Meat Drawer Temperature” on page 15.

IMPORTANT: Because air circulates between both
sections, any odors formed in one section will

transfer to the other. You must thoroughly clean

both sections to eliminate odors. To prevent odor
transfer from food, wrap or cover foods tightly.

R

emoving

the

snap

-

on

door

trivet

(

on

some

modeis

)

The door trivets may be removed for easier clean­

ing. To remove the

trivet, first remove all

items from the shelf.

Then push in slightly
and pull out on each
side of the inside tab
and lift the trivet
straight out.

To replace the trivet, line up the ends of the trivet

with the buttons on the
sides of the door liner.
Push the trivet straight
back until it snaps into
place.

13

Advertising