Whirlpool UPRIGHT FREEZER - Manual (Page 15)

Adjusting the cantilever refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
enough to hold bottles, milk, and other
heavy food items.
To remove a shelf:
1
. Remove items from shelf.
2. Tilt shelf up at front.
3
. Lift shelf at back.
4
. Pull shelf straight out.
To replace a shelf:
1
. Guide the rear shelf hooks into the slots
in the shelf supports on the back liner wall.
2. Tilt front of shelf up until hooks drop
into slots.
3
. Lower front of shelf to a level position.
To slide shelf out (on some models):
• Carefully pull front of shelf toward you.
To slide shelf in:
• Push shelf in until it stops.
NOTE: Glass shelves are heavy. Handle
them carefully.
Adjusting the EZ-TRACK* refrigerator shelf
(on some models)
The EZ-TRACK shelf slides from side
to side for more flexible storage in your
refrigerator.
To slide shelf side to side:
1
. Lift slightly on shelf front.
2. Slide to desired location.
3
. Lower shelf front to level position.
NOTE: You do not have to remove
small items from the shelf before moving
it side to side. You may need to remove
larger items.
14