Removing the meat drawer and cover, To remove the meat drawer, Adjusting the half-width freezer shelf – Whirlpool UPRIGHT FREEZER User Manual
Page 17: On some models)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer and slide meat
drawer out the rest of the way.
3. Replace in reverse order.
To adjust the cover position:
1. Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
To replace the cover:
1. Guide the cover’s rear hooks into the
slots in the shelf supports on cabinet wall.
2. Tilt cover up at front until the hooks drop
into slots.
3. Lower front of cover to a level position.
Pull out to the stop, lift the front, and
pull again.
Adjusting the half-width freezer shelf
(on some models)
Adjust the shelf according to the space you
need in your freezer. Use the bottom posi
tion when you don’t need the shelf at all.
To adjust the shelf:
1. Remove items from the shelf.
2. Lift shelf up at front.
3. Pull shelf out to the stop.
4. Lift back of shelf.
5. Pull shelf out the rest of the way.
To replace the shelf:
1. Guide rear of shelf into desired guide.
2. Lift rear of shelf over stop.
3. Slide shelf in all the way.
4. Lcvver front into place.
16