To change freezer light, Bottom freezer models – Whirlpool UPRIGHT FREEZER User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To change freezer light:
1. Unplug the refrigerator.
2. Grasp the top and bottom of the
light shield.
3.
Squeeze and pull light shield out.
4. Replace with a 25-watt appliance bulb.
5. Snap light shield into place.
6. Plug in the refrigerator.
To change dispenser area light:
1. Unplug the refrigerator.
2. Reach through dispenser area to
remove bulb.
3.
Replace with a heavy-duty 10-watt bulb,
which can be purchased from your
Whirlpool dealer.
4. Plug in the refrigerator.
Bottom freezer models
To change the refrigerator light:
1. Unplug the refrigerator.
2. Push lightly on top center of light shield
until the notched tabs unhook from the
Control Panel.
3.
Pull light shield down until the tabs clear
the Control Panel.
4. Lift back hooks of light shield out of
their slots.
5. Replace with a 40-watt appliance bulb.
6. Replace light shield.
7. Plug in the refrigerator.
To change the freezer light bulb:
1. Unplug the refrigerator.
2. Push in sides of light shield until they
snap free.
3.
Replace with a 40-watt appliance bulb.
4. Snap light shield into place.
5. Plug in the refrigerator.
saagBi
W
26