Removing the ice maker storage bin, Top freezer models only), To remove ice bin – Whirlpool UPRIGHT FREEZER User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the ice maker storage bin
(top freezer models only)
Remove, empty, and clean the storage bin if;
• the ice dispenser has not, or will not, be
used for a week or more.
• a power failure causes ice in the bin to
melt and freeze together.
• the ice dispenser is not used regularly.
To remove ice bin:
1. Pull the covering panel out from the
bottom and slide it to the rear.
2. Lift the signal arm so it clicks into the OFF
(up) position. Ice can still be dispensed,
but no more can be made.
3. Lift the front of the storage bin and pull
it out.
4. Empty the ice bin. Use hot or warm water
to melt the ice if necessary.
Never use
anything sharp
to break up ice in the
bin. This can damage the bin and dis
penser mechanism.
5. Wash with mild detergent. Rinse well.
Do not use harsh or abrasive cleaners
or solvents.
6. When replacing the bin, make sure it is
pushed in all the way. Then push the
signal arm down to the ON position to
restart ice production.
22