Removing the base grille, Changing the light bulbs, Top freezer models – Whirlpool UPRIGHT FREEZER User Manual
Page 26: Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the base grille
To remove the grille:
1. Open door above base grille.
2. Pull base grille forward to release the
support tabs from the metal clips.
3.
Do not remove Tech Sheet
fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close door above base grille.
See cleaning instructions for defrost pan and
condenser coils on page 29.
Condenser
coils
Metal clips
— Defrost pan Base
grille
Support tabs
Changing the light bulbs
▲ WARNING
Electrical Shock Hazard
Unplug the refrigerator before
removing a iight bulb.
Failure to do so can result in death
or eiectrical shock.
Top freezer models
NOTE: Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
bulb with one of the same size and shape.
To change the refrigerator light:
1. Unplug the refrigerator.
2. Reach behind the Control Panel to
remove bulb.
3. Replace with a 40-watt appliance bulb.
4. Plug in the refrigerator.
25