Removing the freezer shelf, To remove the shelf, Removing the freezer baskets – Whirlpool UPRIGHT FREEZER User Manual
Page 19: On some models), To remove the baskets, Removing the pull-out freezer floor, To remove the freezer floor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the freezer shelf
To remove the shelf:
1. Lift right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
Removing the freezer baskets
(on some models)
Remove the freezer baskets for easier
cleaning.
To remove the baskets:
1. Slide basket out to the stop.
2. Lift basket front slightly.
3. Slide basket out the rest of the way.
To replace the baskets:
1. Place basket on slides in liner wall.
2. Make sure the wire stops on basket clear
the front of the slides.
3. Slide basket in all the way.
Removing the pull-out freezer floor
(on some models)
The freezer floor pulls out for easier access
to foods in the back of the freezer and for
easier cleaning.
To remove the freezer floor:
1. Pull floor out about 1 inch (2.5 cm) with
one hand at center front.
2. Lift floor up at rear until hooks release
from cabinet.
3. Pull floor out the rest of the way.
To replace the freezer floor:
1. Position back of floor into freezer opening.
2. Slide floor straight in until hooks drop into
place at rear of cabinet.
18