Document Outline

• SAVE THIS MANUAL
• KenmorG
  • WARRANTY
    • FULL TEN YEAR WARRANTY AGAINST LEAKS
    • FULL ONE YEAR WARRANTY ON WATER SOFTENER
  • TABLE OF CONTENTS
    • PAGE
    • NO.
  • SECTION 1 SOFTENER START UP
  • SECTION 3 CARE OF YOUR SOFTENER
  • SECTION 4 OTHER THINGS TO KNOW
  • SECTION 5 SERVICE TECH INFORMATION
  • SECTION 6 REPAIR PARTS
  • SAFETY GUIDES
  • 1B. CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL
  • PROGRAM THE TIMER
    • NOTE:
    • 1. SET PRESENT TIME OF DAY:
      • NOTE:
      • NOTE:
    • SET WATER HARDNESS NUMBER:
  • PROGRAM THE TIMER
    • NOTE:
    • 2 ppm iron X 5 = 10 (times)
    • 15 gpg hardness ±10
    • 25 HARDNESS NUMBER
    • NOTE:
    • 3. SET RECHARGE (REGENERATION) TIME:
      • NOTE:
    • 4. SET CLEAN FEATURE OPTION:
      • 5. SET SALT TYPE (sodium chloride or potassium chloride, see page 9):
        • If you need help programming the timer, call toll free, number 1-800-426-9345.
  • SANITIZING THE WATER SOFTENER
    • NOTES:
      • You can sanitize the softener wUb or without salt in the storage tank.
  • FILL THE STORAGE TANK WITH SALT
    • NOTES:
    • You have now finished the water softener start up. After the sanitizing recharge, on page 8, the softener will be giving you soft water.
  • FACEPLATE TIMER FEATURES
    • EXTRA RECHARGE
    • RECHARGE NOW
    • -NOTE:
    • RECHARGE TONIGHT
    • SALT MONITOR SYSTEM
    • NOTE:
  • FACEPLATE TIMER FEATURES
    • OPTIONAL ADJUSTABLE SETTINGS
      • NOTE:
        • ^ Maximum Days Between Regenerations -
  • FACEPLATE TIMER FEATURES
    • OTHER FEATURES TANK LIGHT
      • WATER FLOW RATE THROUGH SOFTENER
    • AVERAGE DAILY GALLONS or LITERS
    • LOW SALT INDICATOR LIGHT
    • PROGRAM MEMORY
    • ERROR CODE
    • RECHARGE TIME REMAINING and VALVE POSITION INDICATORS
  • 2B. SOFT WATER SERVICE AND REGENERATION
    • SERVICE
      • BACKWASH FAST RINSE
      • NOTE:
      • WATER FLOW THROUGH THE SOFTENER IN SERVICE
    • REGENERATION
      • WATER FLOW THROUGH THE SOFTENER IN FILL
  • 2B. SOFT WATER SERVICE AND REGENERATION
  • FIG. 7
  • FIG. 6
    • WATER FLOW THROUGH THE SOFTENER IN BRINING AND BRINE RINSE
    • WATER FLOW THROUGH THE SOFTENER IN BACKWASH
  • FIG. 8
    • WATER FLOW THROUGH THE SOFTENER IN FAST RINSE
  • 2B. SOFT WATER SERVICE AND REGENERATION
    • ELECTRONICS
      • NOTE:
  • PLEASE SEE PAGE 9 FOR SALT FILLING DIRECTIONS.
  • SALT BRIDGE
  • 3B. KEEPING THE WATER SOFTENER CLEAN
    • NOTE:
    • NOZZLE & VENTURI
      • CLEANING THE NOZZLE & VENTURI
    • IRON FROM THE RESIN BED
  • KEEP THE SOFTENER FROM FREEZING
    • DRAIN WATER FROM THE SOFTENER
  • HELPFUL HINTS CHECKLIST
  • TO HELP YOU SAVE MONEY
    • NOTES:
  • DIMENSIONS/SPECIFICATIONS
    • BYPASS VALVES
  • MODEL NO. 625.348670
  • TIMER HF CODE HF32
  • TROUBLESHOOTING
    • BACK OF FACEPLATE TIMER (PWA)
    • REMOVE THE TOP COVER AND SALT TANK COVER
  • TROUBLESHOOTING
    • AUTOMATIC ELECTRONIC DIAGNOSTICS
    • MANUAL INITIATED ELECTRONICS DIAGNOSTICS
  • 033-
  • TROUBLESHOOTING
    • INDICATOR VALVE POSITION
    • Setv service
    • Fill fill
    • Brine brining/brine rinse
    • Bkwash backwash
    • Rinse fast rinse
  • 5A.
  • TROUBLESHOOTING
    • MANUAL ADVANCE REGENERATION CHECK
  • ROTARY VALVE SERVICE
    • DISASSEMBLY
    • SERVICING THE VALVE
    • ASSEMBLY
  • SC .. WATER FLOW THROUGH THE SOFTENER VALVE
    • SERVICE CYCLE
    • FILL CYCLE
  • 5C. WATER FLOW THROUGH THE SOFTENER VALVE
    • BRINING AND BRINE RINSE CYCLES
    • BACKWASH CYCLE
  • 5C. WATER FLOW THROUGH THE SOFTENER VALVE
    • FAST RINSE CYCLE
    • INLET-OUTLET GROUNDING CLAMPS
  • PARTS LIST
  • 625.348670