Dimensions/specifigations, Model no. 625.348470 and 625.348490, 4a. dimensions/specifigations – Kenmore 625.34847 User Manual
Page 18: Other things to know, Bypass valyes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION
4
OTHER THINGS TO KNOW
4A.
DIMENSIONS/SPECIFIGATIONS
BYPASS VALYES
MODEL NO. 625.348470 AND 625.348490
TIMER SR CODE SR22
NOTE:
Please see the rating decal for water softener operating capacity, salt usage and service flow rate/pressure
loss performance specifications. Performance specifications are validated by the Water Quality Associa
tion (WQA). The rating decal is located on the rim, under the salt hole cover (see page 28)
WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm)
3
MINIMUM-MAXIMUM
WATER
PRESSURE
(psi)
20-120
MAXIMUM WATER TEMPERATURE f F)
120
MAXIMUM WATER HARDNESS (gpg)
90*
MAXMUM "CLEAR WATER” IRON {ppm)
4
SALT FOR WATER gopTEfyjER
TYPE OF SALT NEEDED
Nuggel/Pellst
ALTERNATE TYPE OF SALT Pure, evaporated, compacted
water softener salt
STORAGE CAPACITY (pounds)
200
'Do not exceed this number when setting hardness in step 2,
page 7 The maximum setting available is 95.
OTHERS
TYPE OF ION EXCHANGE MATERIAL (resin) High Capacity
AMOUNT OF RESIN (cu.,ft,)
,70
REGENERATION (RECHARGE) CYCLE TIME (min.)
FILL
2“8
BRÍNING/BRINE RINSE
103
BACKWASH
7
FAST RINSE
3
TOTAL REGENERATION TIME
115-121
gpm = gallons per minute
gpg = grains per gallon
psi = pounds per square inch
ppm = parts per million
18