5c. water flow through the softener valve, Fast rinse cycle – Kenmore 625.34847 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 5
SERVICE TECH. INFORMATION
5C. WATER FLOW THROUGH THE SOFTENER VALVE
FAST RINSE CYCLE
ROTOR & DISC
During FAST RINSE, the rocor 5c disc is positioned so water flow enters the
resin rank through die top distributor, and exits through the bottom
distributor, to the drain
The solid state timer again energizes the motor to return the valve to
service, and as the valve rotates, the position switch lever drops to open the
circuit. The valve remains positioned in service until the timer initiates the
next regeneration.
26
Advertising