Prepare your top thread – Kenmore 19501 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PRE'PARE YOUR MACHINE FOR SEWING
Prepare Your Top Thread
» Check Your Presser Foot
Your presser toot is held in place by a Foot Holder. Each presser foot merely
snaps on the foot holder, which is seldom removed.
If you need to rennove or attach the toot holder, here is what you do:
To Remove:
To Attach;
Turn the screw toward the back of the
machine. Use the large screw driver.
1.
Match the hole in the toot holder
with the threaded hole in the
presser bar.
2.
Fit the toot holder screw into the
hole.
3.
Tighten the screw by turning it
toward you.
22
Advertising