Kenmore 19501 - Manual (Page 24)

SECTiOiSI 1 PREPARE YGUR MACHINE FOR SEWING
e Change the Presser Foot
Use the correct presser foot for the stitch you wish to sew. Consult the
Stitch Pattern Chart and the detailed directions for sewing with the various
presser feet.
To snap off To snap on
1. Press the Up/Down Needle Position Button to raise the needle to its
highest position,
2. Raise the presser foot.
3. Press the red button on the back of the toot holder. The presser toot
will drop off.
1. Set the Pressure Dial at "3"
2. Place the presser foot so the hori­
zontal pm on the foot lies just
under the groove of the foot
holder,
3. Lower the presser foot holder to
lock the presser toot in place.
NOTE: If you do not hear the
presser toot snap in place,
press down on the presser
foot holder firmly until you
hear the snap.
23