Pattern indicator screen, Pattern selection buttons, Sensorseui 7q – Kenmore 19501 User Manual
Page 31: Odsmcld, E3ceici
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 3.. LE'ARN -TO USE THE CONTROLS
Pattern Indicator Screen
Pattern Selection Buttons
SensorSeui 7Q {
ODSmClD'
E3CEICI]
f~i~] I 2 [ fT~]
10 ~ 9)
This two digit indicator screen lights
up to show what stitch pattern you are
using.
NOTE;
When
you
turn
on
your
machine, the indicator will
automatically
show
the
straight stitch [ip] .
To Select a Stitch Pattern;
1. Press two numbers to indicate
which pattern you want to use.
2.
The numbers will show on the
pattern indicator screen.
Example: You want to use decorative stitch gS] -
1. Press [
4 ] , A number 4 and a flashing line will appear on the
pattern indicator screen,
2.
Press tl]
You have selected stitch pattern §§] ,
NOTE; If you select numbers not on the stitch pattern chart (See inside
machine top cover and p. 45 to 49 ). the machine will blink until you
select numbers on the chart.
30