Sand stitch, Section; 5^ - leari – Kenmore 19501 User Manual
Page 82
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Sand Stitch
-- SECTION; 5^ - LEARI^
Set the IVIachine
1
SeiuRirSeuj
7H
[3CDCIDS
CEICIDGD
“CEI DDCDGD
rn [71031 iB
Thread tension
1 to 4
F‘ Satin stitch
toot
Pressure dial: 1 or 2
The Stitch and its Uses
The sand stitch fills in outlined embroidery
designs.
1.
Outline the pattern with a Satin Stitch
IS-
Set stitch width at '"1.5".
Setstitch length at "0.3" or as you desire.
2.
Fill in the design with the sand stitch.
3.
Decrease the stitch width to fill in small
spaces.
4.
Sew in rows, starting at the edge, until
the pattern is filled in.
81
Advertising