Oil the face cover plate – Kenmore 19501 User Manual
Page 93
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 7. CARE FOR YOUR MACHINE
Oil the Underside
Oil the Face Cover Plate
e
o
® e^O
O
\A
b
/
o
I
lo
Oo
Fig. 1
Fig. 2
1. Oil at those points indicated by short arrows in the illustration above.
No other oiling is required.
DO NOT REMOVE the top cover or base cover. No customer service is
required in these areas.
1. Tilt the machine head back.
2.
Remove the bottom covers by loosening the two screws, A and B, under
the free arm. (Fig. 1)
3.
Oil at the arrows shown in the illustration. (Fig. 2)
NOTE:
No other oiling is required.
92
Advertising