Section.'s.-; learwto-usethe.0ntr'6i, Up/down needle position button – Kenmore 19501 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
’ ■ ■ SECTiON.'S.-; LEARWTO-USETHE.0NTR'6i:^‘
Up/Down Needle Position Button
Control Panel
When you press this button, the needle will go up or down.
If the needle is up and you press this button, the needle will go down to its
lowest position.
If the needle is down and you press this button, the needle will go to its
highest position.
CAUTION:
Do not press the foot control while you press the up/down
needle position button.
Use this button to:
— take up the bobbin thread {down and up) as you hold the top thread
— turn a corner (down to keep the fabric from slipping)
It eliminates the hand wheel for raising and towering the needle.
SensorSeui ?D
DQrad]
HER
0
1
CD
r
. CED nn
0
1
Stitch
Pattern
Section
Stitch Width
■ and Length
Section
Stitch-Lock
Section
The Control Panel is divided into three sections:
The Stitch Pattern Section,
where you set stitch patterns, with memory and clear buttons, and
convenient straight and zigzag stitch buttons.
The Stitch Width and Length Section,
where you set the length of straight stitches and the length and width of
zigzag stitches.
The Stitch-Lock Section,
with the Reverse and Auto-Lock buttons to secure your stitches either
manually or automatically.
29