Kenmore 88963 - Manual (Page 10)

OVEN CONTROL PANEL
Convec Time—Used in setting
Convection Cooking Time,
Oven Temp/Preheat—Used in
setting the desired Oven
Temperature or Preheat
Temperature.
Stop Time—Used in setting a
Delay Start Cooking Cooking
can be finished at a preset stop
time.
Time of Day—Used in setting
Time of Day and Child Lock-Out
Micro Time-Used in settin
Microwave Cooking Time,
Numbers—Used to enter the
Time of Day, Delay Stan Time,
Cooking Times, Cooking Powers
and Cooking Temperatures.
Micro Power-Used in setting'
Microwave Cooking Power
Levels,
Clear—Clears all entries except
Time of Day. Once cooking has
begun, however, CLEAR will
function only after STOP has
been touched
Micro/Convec Time—Used in
setting Micro/Convec Cooking
Time.
Microi/Convec Temp-Used in
setting the desired probe
temperature during Micro/
Convec Cooking
Convec Temp—Used in setting
the desired probe temperature
during Convection Cooking.
Quick-On—Used in setting first
start cooking at high power.
Pause—Used to stop Oven
between the Cooking Stages.
Memory/Recall—Used in
setting Cooking Time, Power
Level and Temperature for Multi­
Stage Cooking. Also used to
recall each memory stage in a
multiple stage program.
Hold Warm—Used hi setting a
Hold Warm, Cooked food can
be kept warm.
Micro Temp—Used in setting
the desired probe temperature
during MiCTowave Cooking.
Temperature Controlled Cook­
ing can be done only when the
Temperature Probe is plugged
into the socket inside the oven.
Stop—Stops Oven.
Start—Starts Oven.
NOTE: A "beep tone" sounds when a "pad” on
the control panel is touched, to indicate a
setting has been entered
10