Kenmore 88963 - Manual (Page 20)

'Ira:*.
^iHl|=iliyW/iVt-
“HI-POWERTMIJLTI-POWER” COOKING
“HI" gives the highest cooking power possible with your oven. It is the recommended setting for cooking foods with high
moisture content or for cooking foods that need fast cooking to maintain their natural flavor and texture. Many foods
need slower cooking {at less than full power) in order to give you the best results, in addition to “HI” there are ninety-nine
multi-power settings. The cookbook tells you which power setting is recommended for the food being cooked.
To Cook
{Remove metal rack, place ceramic tray in oven.)
1 . Touch CLEAR, and a beep tone will be heard. The
CLEAR erases all previous settings. Place food in
oven, then dose the door,
2. Touch MICRO TIME. The lights above TIME and
MICRO, below COOK 1 will go on. (“0” will show in
the display unndow.)
3. Touch the correct numbers on the control panel to
set the cooking time. The time set will show in the
display window at the top of the control panel For
example:
o To set 30 seconds, you would touch “3” and then
“
0
”.
e To set 3 minutes, touch "3”, “0” and “0".
B To set 3-1/2 minutes, touch “3", “3” and “0".
Remember, the timer is a digital dock that is divided
into 60 seconds. Therefore, 1/2 minute is equal to 30
seconds. Touch 30 and not 50 (as with a calculator)
to indicate
1 / 2 .
4 . Touch MICRO POWER. The lights above MICRO
and below COOK 1 will go on. Also, the word “HI”
will show in the display window until a lower setting
is entered This is to tell you that the oven will be
operating on "HI” unless a different power setting is
chosen,
5 . Touch numbers for desired cooking power level. For
example, if the recipe calls for cooking at the “20
(LOW)" setting, you would touch “2” and “0". The
display window will show "20" This means that in
the LOW setting, the oven is cooking at power level
20 ■
NOTE: l! is not necessary to touch MICRO POWER
when cooking writh the highest power (“HI”). To set
"HI-POWER" cooking, skip steps 4 and 5 above.
However, if MICRO POWER is touched, the light
above MICRO will go on and the word “HI” will show
in the display window. This is to let you know that the
oven will be operating on “HI” power unless a different
power setting is chosen
6 . Touch START, The oven begins to cook and the
display window will show the time counting down.
A tone will sound and the word "End” will show in
the display window for two seconds when the
cooking time is completed. Then the oven wiD shut
itself off
20
EXAMPLE: To warm 4 doughnuts, you would cook at
power level 80 or “80 (REHEAT)” for 35 seconds. To
do this, follow these six steps.
1 . Touch CLEAR.
2. Touch MICRO TIME
Place doughnuts in oven,
then dose the door.
3. Set 35 seconds by touching
“3”andthen“S”.“35”wfll
show in the display window.
3S
4. Touch MICRO POWER.
The display window will show
“HI”.
5. Choose the “30 (REHEAT)” w_s_
setting by touching the num­
bers “
8 ” and “0”, The display
window will show “80”. This
means the oven is cooking at
power level 80, :
Jis.
6 . Touch START. The oven
begins to cook and the time
will begin to count down in
the display window,
A tone will sound and the
word “End” will show in the
display window for
2 seconds
when the 1 - 1/2 minutes are
over. Then the oven will shut
itself off.,
NOTE: If you want to keep the
food warm after finishing the
cooking, you can use "Hold
Warm" feature. For detailed
instructions on using "Hold
Warm" feature, sec page 16.