Kenmore 88963 - Manual (Page 24)

rgL'*Vy*?f^y^'* rs»,v.' J»* vqJI,■ ytVT-rwr-yCT
S^Sgr7
SEaSiES
TEMPERATURE CONTROLLED
“HI-POWERTMULTLPOWER” COOKING
The "Temihfirature.Controlled Meat Cooking Guide * and "Reheating Guide” on Pages 22 and 23 will show
you which multi-power setting and temperature setting are recommended for the food you are cooking
When cooking with the temperature control settings, the timer is not used.
Place the temperature probe into the
food with the first inch of the
sensor in the center of the food.
The probe should be in a
level direction or on an
angle as shown.
It should
NOT be put in from
the top.
2. Plug the temperature
probe into the socket on
the side of the oven.
CAUTION: Do not plug
the pointed end of the
temperature probe into
the socket.
3. Touch CLEAR.
4. Touch MICRO TEMP.
The lights above TEMP and
MICRO, below COOK 1 will
go on, and *T” will show in
the display window.
5. Choose the food temperature
and touch the corresponding
numbers. For example, if the
recipe calls for doneness at
165° F, you would touch
numbers‘T’%" and "5"
When you touch “165", the
display window will show
“165F” , If the temperature
probe is not plugged into the
socket, the word “Prob” will
flash and the oven wiD not
work.
rwi
IS Sf
, rss^snpa^wT^
£g~ir^nnsn
^ J i, , 5 _J
NOTE: The highest tempera­
ture that can be set is 18S°F.
6 . Touch MICRO POWER. ™
The word "HI” will show in
the display window untE you
enter a lower power setting.
This is to remind you that the
oven will always operate at full
power unless you set a lower
power.
24
« /
IPSnnigt
7. Choose the power control
setting you desire and touch
the corresponding numbers.
For example, if the recipe
should calí for cooking at the
“70 (ROA$T)” setting, you
would touch numbers "7” and
When you touch “7" and “0",
the display window will show
“70”. This ¡means that in the
"70 (ROAST)" setting, the
oven is at ^wer level 70.
NOTE: You do not need to
touch MICRO POWER when
you ate cooldng with HI (max
power). To set "Hi -POWER"
Cooking, skip steps
6 and 7
above. However, if MICRO
POWER is touched, the light
above MICRO will go on and the
word “HI” will show in the
display window. This is to tcB
you that the oven wiU work at HI
(highest microwave power)
unless a different power setting is
chosen.
8 . Touch START. The oven will
begin to cook and you will be
able to see the temperature of
the food rising in the display
window.
9. A tone will sound and the
word “End” will show in the
display wipdow for
2 seconds
when the desired temperature
is reached.
NOTE: If you want to keep the food warm after
finishing the set cooking, you can use "Hold Warm"
feature. For detailed instructions on using "Hold
Warm" feature, see page 15.