Sharp VIEWCAM VL-NZ50U - Manual (Page 26)

Preparation
Setting the Date and
Time
Example: Setting the date to June 2, 2003
(JUN, 2, 2003) and the time to 10:30 am
(10:30 AM).
SET button
Note:
• Before performing the steps below, make sure
that the lithium battery has been installed (see
page 11).
1 Hold down the Lock button .
and set the Power switch to
CAMERA.
fi o'
Lock button
Press the MENU button until the menu
screen appears.
4
Press
V
or
Л
to select “JUN” (month),
then press the SET button.
S E T T I N G J U N . П - 2 0 0 2
1 2 : 0 0 A M
5 Press V or Л to select “2” (day), then
press the SET button.
S E T T I N G J U N . 2.Ш Б
1 2 : 0 0 A M
6 Press V or Л to select “2003” (year),
then press the SET button.
S E T T I N G J U N . 2 . 2 0 0 3
ЕВ:00СС:
7 Press 7 or Л to select “10 AM” (hour),
then press the SET button.
S E T T I N G J U N . 2 . 2 0 0 3
1 0 : [ | E A M
8 Press V or Л to select “30” (minute),
then press the SET button.
• The internal clock now starts operating,
l J U N . 2 . 2 0 0 3
1 0 : 3 0 A M ............
S E T T I N G
9 Press the MENU button to turn off the
menu screen.
Note:
♦ If the date and time have been set, the SETTING
1 screen (O) appears in step 2. Select
“SETTING” in the CLOCK SET screen (©) using
the Operation button and SET button.
3 Press the SET button.
13