Gain-up, To obtain a brighter picture, To cancel the gain-up function – Sharp VIEWCAM VL-NZ50U User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Gain-Up
iiiuminated location, “LIGHT” Is displayed on
the screen. Use the gain-up function to record
a brighter picture.
Note:
• At locations where lighting is adequate, “LIGHT”
will not appear. The gain-up function cannot be
used in this case.
To obtain a brighter picture
Press the GAMMA/BRIGHTER button again.
• The TlXlT indicator appears.
GAMMA
gxi?
In CAMERA mode, press the GAMMA/
BRIGHTER button once.
• “GAMMA” appears, indicating that the gain-
up function is now working.
To cancel the gain-up function
Press the GAMMA/BRIGHTER button until
“GAMMA” disappears.
Notes:
♦ You may experience some picture noise in Gain-
up mode, which increases when the TIXIT
displays.
• When the 'LIXI/ indicator displays, you may get
a shadow image behind a subject that is moving
around a lot.
♦ Fine brightness adjustments are possible when
using manual exposure (see page 38).
• Gain-up will cancel if you aim the camcorder in a
bright location.
S'
GAMMA
L I GHT
26